Hardwood Flooring in San Francisco

San Francisco Conditions That Affect Solid Hardwood

NOAA's Comparative Climatic Data humidity table lists San Francisco (station 23272, period of record 1945-2018) at a mean July relative humidity of 91% in the morning and 71% in the afternoon, with annual means of 87% and 69%. The same table gives Sacramento a July afternoon mean of 29% and Stockton 27%. San Francisco's morning-to-afternoon spread of about 20 points is among the narrowest in the table; Sacramento's is roughly 42. San Francisco summers running near 67°F pull indoor humidity down hard whenever the air conditioning is working. Solid hardwood answers that by shrinking, which is what opens seasonal gaps between boards. The fix is not a tighter install — it is acclimating the wood to the house's real conditions before it goes down, and setting expansion space at the walls to match the swing this climate actually produces.

NOAA 1991-2020 normals at San Francisco Downtown give a January average high of 57.8°F and an average low of 46.6°F. Winter lows sit well above freezing. Annual precipitation normal is 22.9 inches; December is the wettest month at 4.76 inches, with January close behind at 4.40. Winter runs the same cycle in reverse. Solid hardwood is a hygroscopic material: it moves with the seasons for its whole service life, and an install that ignores that is an install that telegraphs every season change through the floor.

The marine layer holds summer temperatures far below the inland valleys. The July normal high at San Francisco Downtown is 66.3°F and August is 67.9°F — about 15°F cooler than Redwood City, some 23 miles down the peninsula, which normals at 81.0°F in July. The city's warmest month is September, at 70.2°F. Whatever the outdoor pattern in San Francisco, solid hardwood responds to the air inside the house, so the wood acclimates to the rooms it is going into rather than to a delivery truck or a garage.

Measured Humidity and Solid Wood Movement in San Francisco

Oakland International Airport, 11 miles from San Francisco and at about the same elevation, supplied the 79,943 hourly dewpoint readings, 2015 to 2025, behind these figures. Warm that winter air to 70°F without adding moisture and it settles at a median 42.3% relative humidity, with 14% of heating-season hours below the 30% floor NWFA sets for wood floors; the same air reaches 59% in summer. Solid hardwood follows those numbers: its equilibrium moisture content runs from about 8% in the heating season to 10.8% in summer, and on the Forest Products Laboratory's coefficients for American white oak that swing changes the width of a 5-inch plainsawn board by about 0.053 inch (about 1/19 inch) — against 0.027 inch for the same board quartersawn. That is a mild climate for solid wood, and it is why wider plank is a realistic choice in San Francisco rather than a gamble.

Source: Hourly ASOS dewpoint observations 2015–2025, Iowa Environmental Mesonet (Iowa State University); equilibrium moisture content from USDA Wood Handbook FPL-GTR-190 Eq. 4-5; movement from FPL-GTR-282 Eq. 13-3 and Table 13-5

Subfloor and Foundation Work

California's Earthquake Brace + Bolt program, administered by the California Residential Mitigation Program, states that 'an EBB seismic retrofit is only done on wood-framed, pre-1980 homes with a raised foundation,' targeting cripple walls in crawl spaces beneath the structure. Twenty-eight San Francisco ZIP codes appear on the 2025 EBB Northern California eligibility list, from 94102 through 94158. Eligibility is set by ZIP code, so the list shows where the state offers that retrofit, not how many homes have raised foundations, and no source publishes a measured raised-versus-slab split for San Francisco. Alongside this, 76.5% of the city's 414,602 housing units predate 1980 and 45.2% predate 1940 per ACS. Separately, San Francisco's mandatory soft-story retrofit program applies to 'wood-frame structures, containing five or more residential units, having two or more stories over a soft or weak story, and permitted for construction prior to January 1, 1978' — evidence about multi-unit buildings, not about single-family foundation type, and not used here as a proxy for one.

Over a crawlspace, solid hardwood is in its element — plank or plywood subfloors take fasteners well — but only when the crawlspace itself is dry. We check the ground cover, look for standing water and rot at the joist ends, and read the moisture content of the subfloor from below. Cupping in a solid floor is almost always a crawlspace problem that surfaced upstairs.

Source: NAHB analysis of the Census Bureau Survey of Construction, foundation type by region (2024)

San Francisco Homes We Work In

ACS 2020-2024 five-year estimates count 414,602 housing units, of which 45.2% (187,447 units) were built in 1939 or earlier — by count, more pre-war housing than any other city in this service area (Berkeley's share, 46.3%, is statistically the same). A further 8.4% date to 1940-1949, and 76.5% of all units predate 1980; construction from 2000 onward accounts for 14.4% of the stock. 69.4% of units are in buildings with two or more units. San Francisco's pre-1940 and 1940s stock is directly relevant here, because homes of that period frequently have a board or plywood subfloor that will hold a nail-down installation, and sometimes original wood still under the carpet. We check for both before quoting a full replacement — refinishing what's already there is often the better answer.